Laser cutting
AMADA ENSIS 3015 AJ 9 KW + ASF3015EU + TK3015L
Overwiew of benefits:
- Different materials can be cut (e.g.: steel, stainless steel)
- Working with difficult-to-cut materials is also possible (e.g.: copper, titanium, brass)
- Thanks to high laser power, shorter working times and higher working speeds can be achieved
- Variable radius technology that adapts to the type and thickness of the material
- Piercing with oil injecting - prevents splashing and improves quality
- CoolingCut (cut cooling) – to the stable machining of the thick materials
- The automatic shelving system and the automatic sorting system contribute to the efficiency of the machine
| Technical parameters - laser cutting mashine | |
| Laser power | 9 kW |
| Working range (X x Y) | 3070 x 1550 mm |
| Max. work weight | 920 kg |
| Repeatable positioning accuracy | +/- 0,1 mm |
| Controller | AMNC 3i |
| Material | Material thickness* |
| Steel | 0,5-25,0 mm |
| Stainless steel | 0,5-25,0 mm |
| Aluminium | 0,5-25,0 mm |
| Brass | 0,5-18,0 mm |
| Copper | 0,5-12,0 mm |
| Titan | 0,5-15,0 mm |
*Depends on material, thickness, pre-treatment, type of workpiece and board size
| Technical parameters - ASF-3015 EU | |
| Pallet raw material | 7 pc |
| Pallet for unloading | 3 pc |
| Sheet size max. | 3050 x 1525 mm |
| Sheet size min. | 1500 x 1000 mm |
| Sheet thickness | 0,8-25 mm |
| Technical parameters - TK 3015L | |
| Stacking area | 3050 x 1525 mm |
| Max. part weight | 70 kg |
| Sheet thickness* | 1-9 mm |
| TK unit size (arm close) | 770 x 540 mm |
| TK unit size (both sides arm open) | 1270 x 540 mm |
| TK cycle time | 10-15 sec/pc |
*The technical specification depends on the geometry of the parts, the type of cutting technology, the size of the part and the mass and thickness of the material.
