We try to keep frequently used material grades and thicknesses in stock.

The largest board size that we can currently work with is 4000 x 2000 mm, but most of our machines have a 3000 x 1500 mm cutting table, so we prefer this board size.

Of course, we can also get standard board sizes on request.

 

Our stock changes from day to day, but in general the following list of materials are available at short notice.

 

Cold rolled non-alloy steels

EN10130 2006	WNr.	Thickness
DC01	1.330	0,5-2.99 mm

 

Hot-rolled non-alloy structural steels

MSZ EN 10025	WNr.	Thickness
S235JR	1.0038	3-20 mm
S355J2	1.0570	3-60 mm

 

Micro-alloyed cold-rolled steels with high yield strength

EN 10149-2	WNr.	Thickness
S355MC	1.0976	3-10 mm

 

Hot dip galvanized sheets

MSZ EN 10215	WNr.	Thickness
DX51D+Z	1.0226	0,55-4 mm

 

Heat resistant steels

MSZ 4359	WNr.	Thickness
H8	1.4828	1-10 mm
H10	1.4841	1-10 mm

 

Austenitic steels

MSZ4360	WNr.	Thickness
KO33 (korr.álló)	1.4301*	0,5-30 mm
KO38	1.4404	1-15 mm
KO35TI (saválló)	1.4571	1-15 mm

* 1.4301 material quality is available with several surface qualities. E.g. one side, two sides polished.

 

Alloyed aluminium

	WNr.	Thickness
AlMg3 H22/H24/H111	EN AW 5754	0,5-15 mm

 

Wear resistant steel

	Thickness
Hardox 450	3-20 mm

 

Hot rolled weather resistant steel

	WNr.	Thickness
EN10029 Corten	1.8965	2-15 mm

 

Boron steels

27MnCrB5 - BORON27

 

Spring steel

1.4310; C75/85S

 

Other materials:

PVC; POM; PE; Polycarbonate; Glass; Textile bakelite; Rubber sheets